Eureka Vacuum Cleaner SC780 User Manual

Household Type  
Vacuum Cleaner  
Owner’s Guide  
SC780 Series  
Index  
Important Safeguards.................. 2  
General Information .................... 6  
Use.............................................. 7  
Dust Bag ................................... 10  
Brush Roll.................................. 12  
Brush Roll Belt .......................... 12  
Warranty.................................... 15  
For location of nearest  
Eureka Warranty Station  
or service information call  
1-800-282-2886.  
 
Grounding Instructions  
This appliance must be grounded. If it should malfunction or breakdown, grounding  
provides a path of least resistance for electric current to reduce the risk of electric shock.  
This appliance is equipped with a cord having an equipment-grounding conductor and  
grounding plug. The plug must be plugged into an appropriate outlet that is properly  
installed and grounded in accordance with all local codes and ordinances.  
DANGER  
Improper connection of an equipment-grounding conductor can result in risk of electric  
shock. Check with a qualified electrician or service person if you are in doubt as to  
whether the outlet is properly grounded. Do not modify the plug provided with the  
appliance. If it will not fit the outlet, have proper outlet installed by a qualified technician.  
This appliance is for use on a nominal 120 volt circuit and has a grounding plug that  
looks like the plug illustrated in FigureA.Atemporary adapter which looks like the adapter  
illustrated in Figure B may be used to connect this plug to a two-pole receptacle, as  
shown, if a properly grounded outlet is not available. The temporary adapter should be  
used only until a properly grounded outlet, Figure A, can be installed by a qualified  
electrician. The green colored rigid ear, lug, or the like extending from the adapter must  
be connected to a permanent ground such as a properly grounded outlet box cover.  
Whenever the adapter is used, it must be held in place by a metal screw.  
NOTE: In Canada, the use of a temporary adapter is not permitted by the Canadian  
Electrical Code.  
GROUNDED  
OUTLET BOX  
GROUNDED  
OUTLET BOX  
ADAPTER  
GROUNDING BLADE  
IS LONGEST OF THE  
THREE BLADES  
FIGURE A  
FIGURE B  
METAL  
SCREW  
GROUNDING  
TAB  
3
 
CONSEILS DE SÉCURITÉ  
Lors de l’utilisation d’un appareil électrique, quelques précautions élémentaires doivent  
être observées, incluant les suivantes:  
LISEZ TOUTES LES INSTRUCTIONS AVANT D’UTILISER VOTRE ASPIRATEUR.  
AVERTISSEMENT  
Pour réduire le risque de feu, de choc électrique, ou de blessure:  
Ne pas utiliser à l’extérieur ou sur des surfaces mouillées.  
Fermez le commutateur et débranchez l’appareil lorsque vous ne l’utilisez pas  
ou avant le nettoyage ou l’entretien.  
Ne permettez pas qu’il soit utilisé comme jouet. Une attention particulière est nécessaire  
lorsque utilisé par ou près d’un enfant.  
Suivez les recommandations d’utilisation de ce manuel. Utilisez uniquement les  
accessoires recommandés par le fabriquant.  
Ne pas utiliser si le cordon ou la fiche sont endommagés. Si l’aspirateur ne fonctionne  
pas comme il le devrait, s’il a été échappé, s’il est endommagé, s’il a été laissé à  
l’extérieur ou échappé dans l’eau, retournez-le à un centre de service avant de utiliser.  
Ne pas le tirer ou le transporter par le cordon, ne pas utiliser le cordon en guise de  
poignée. Ne pas fermer une porte sur le cordon ou tirer le cordon sur des coins ou  
bordures pointus. Ne pas circuler sur le cordon avec l’aspirateur. Tenir le cordon à  
distance des surfaces chauffantes.  
Branchez toujours l’aspirateur dans une prise à trois (mise à la terre).  
Ne pas utiliser des rallonges ou des prises qui n’ont pas de capacité suffisante pour  
transporter le courant.  
Fermer tous les contrôles avant débrancher.  
Ne pas débrancher en tirant sur le cordon. Pour débrancher, tenez la fiche et non le  
cordon.  
Ne pas manipuler la fiche ou l’aspirateur avec les mains mouillées.  
Ne pas rien insérer dans les ouvertures. Ne pas utiliser si des ouvertures sont bloquées;  
assurez-vous qu’elles soient dégagées de poussière, mousse, cheveux ou toute autre  
chose qui pourrait réduire le passage de l’air.  
Cet aspirateur créé de la succion et contient un rouleau-brosse tournant. Tenir les  
parties mobiles et les ouvertures loin des cheveux, du linge, des doigts et de toute  
partie du corps.  
Ne pas ramasser des objets qui brûlent ou fument comme les cigarettes, allumettes ou  
cendres chaudes.  
N’utilisez pas sans le sac de poussière en place.  
Les poulies du courroie peuvent devenir chaudes pendant l’utilisation normale. Pour  
prévenir des brûlures, évitez de touché la poulie du courroie lorsque vous réparez la  
courroie.  
Portez une attention particulière lorsque vous nettoyez les escaliers.  
Ne pas utiliser pour ramasser des liquides inflammables ou combustibles comme de  
l’essence: Ne pas utiliser dans les endroits où ces liquides pourraient être présents.  
Entreposez votre aspirateur à l’intérieur dans un endroit propre et sec.  
Maintenez un bon éclairage à l’endroit où vous travaillez.  
Débrancher les appareils électrique avant de les balayer.  
CONSERVEZ CES INSTRUCTIONS  
4
 
INSTRUCTIONS VISANT LA MISE À LA TERRE  
Cet appareil doit être mis à la terre. En cas défaillance ou de panne éventuelles, la  
mise à la terre fournit au courant un chemin de moindre résistance qui réduit le  
risque de choc électrique. Cet appareil est pourvu d’un cordon muni d’un conducteur  
de terre et d’une fiche avec broche de terre. La fiche doit être branchée dans une  
prise appropriée correctement installée et mise à la terre conformément aux  
règlements et ordonnances municipaux.  
AVERTISSEMENT  
Un conducteur de terre mal raccordé peut entraîner un risque de choc électrique.  
Consulter un électricien ou un technicien d’entretien qualifié si vous n’êtes pas certain  
que la prise est correctement mise à la terre. Ne pas modifier la fiche fournie avec  
l’appareil-si elle ne peut être insérée dans la prise, faire installer une prise adéquate  
par un électricien qualifié.  
Note: Au Canada, l’utilisation d’un adaptateur temporaire n’est pas autorisée par le  
Code canadien de l’électricité.  
Cet appareil est destiné à un circuit de 120 V et est muni d’une fiche de mise à la terre  
semblable à celle illustrée par le Figure A. S’assurer que l’appareil est branché à une  
prise de courant ayant la même configuration que la fiche. Aucun adaptateur ne devrait  
être utilisé avec cet appareil.  
Boîte de Prise de Terre  
FIGURE A  
LA LAME DE TERRE  
EST LA PLUS LONGUE  
DES TROIS LAMES  
5
 
GENERAL INFORMATION  
The cleaner is designed to pick up dirt and dust particles. Avoid picking up hard or  
sharp objects with the cleaner to prevent bag tears and hose clogs.  
Service Information  
The instructions in this booklet serve as a guide to routine maintenance. For additional  
service information telephone our toll free number for the nearest Eureka Authorized  
Warranty Station. You should know the model, type and serial numbers when you  
call:  
USA: 1-800-282-2886  
Mexico: 5670-6169  
Canada: 1-800-282-2886  
If you prefer, you can write to The Eureka Company, Service Division, 807 North Main  
Street, Bloomington, Illinois 61701, USA. In Canada write to The Eureka Company, 866  
Langs Drive, Cambridge, Ontario N3H 2N7. Refer to The Eureka Warranty for complete  
service information.  
DO NOT OIL the motor or the brush roll at any time. The bearings are  
permanently lubricated and sealed.  
Rating Plate  
MODEL  
VOLTS  
TYPE  
SERIAL NO.  
HERTZ  
The model, type, and serial number are  
indicated on the rating plate located on  
the back of the cleaner. For prompt and  
complete service information, always  
refer to these numbers when inquiring  
about service.  
AMPS.  
SERVICE INFORMATION: 1-800-282-2886  
Model & Type____________________  
Serial No._______________________  
Cleaner Care  
NOTE: Turn off the switch and unplug the electrical cord before cleaning unit.  
To keep the vacuum cleaner looking new, it can be wiped with a damp cloth and a mild  
soap solution, then thoroughly dried. Never use any type of chemical as chemicals  
can damage the cleaner. When not in use, the cleaner should be stored in a clean, dry  
place.  
6
 
HOW TO USE  
HANDLE  
2
RELEASE  
3
PERFORMANCE  
INDICATOR  
1
3 POSITION  
ON/OFF  
SWITCH  
1
Power Switch  
Top position is Off. Middle position is for floor cleaning and  
cleaning with accessories (brush roll does not turn). Bottom  
position is for cleaning carpets (brush roll turns).  
2
Handle Release  
When handle is in collapsed position, press handle release  
button and rotate handle into upright position.  
3
Performance Indicator  
The performance indicator light will come on when there  
is a drop in the vacuums performance. Check for a full  
dust bag, dirty filters or a clog in the brush roll or hose  
areas. If a full bag, dirty filter or clogged brush roll/hose is  
found, replace the bag, clean or replace the filters, or  
unclog the brush roll/hose areas.  
7
 
HOW TO USE  
4
Cord Retainer  
When preparing to use vacuum,  
firmly push the electrical cord  
down into the cord retainer. This  
will place the electrical cord out  
of the way while you vacuum.  
CORD  
RETAINER  
4
5
Handle Collapse Button  
HANDLE  
5
COLLAPSE  
BUTTON  
To collapse the handle from the  
upright position, press handle  
collapse button, rotate handle  
down until latch in hand grip  
locks onto the body.  
CORD  
STORAGE  
HOOKS  
6
7
HANDLE  
RELEASE  
PEDAL  
6
Cord Storage Hooks  
This unit has two convenient  
cord storage hooks attached  
to the handle. Wind the cord  
around the hooks and fasten  
the plug to the cord to prevent  
unwinding.  
RESET  
BUTTON  
8
9
RESET  
LIGHT  
7
Handle Release Pedal  
The handle release pedal is located next to the floor between  
the two wheels on the back of the cleaner. Step on the handle  
release pedal and pull back handle to find a comfortable  
operating position. Handle will automatically lock into storage  
position when handle is rotated into upright position.  
8
Reset Button  
This unit uses a cogged, non-stretch belt. If a large object causes  
the brush roll to jam, the brush roll motor shuts off and the Reset  
Light illuminates. Turn off and unplug the unit. Check the brush roll  
for debris and clean if needed. Press the reset button, plug in the  
unit and turn on to continue cleaning.  
9
Reset Light  
The reset light is a LED light that illuminates when the brush roll  
jams. See reset button above for actions to take when this light comes  
on.  
8
 
HOW TO USE ACCESSORIES  
1
5
3
2
Dusting Brush  
2
4
1
Collapse the handle from the upright position. Press handle release button and  
rotate handle down and against the body of the cleaner until it locks onto the body.  
2
The dusting brush and upholstery nozzle fit on both the hose and the wand with  
a built-in crevice tool.  
3
Use the dusting brush to dust furniture, blinds, books, lamps,  
shelves.  
4
5
The crevice tool cleans corners, base boards, between cushions.  
Hose elbow rotates for easy use of the hose and  
attachments.  
To disconnect hose for inspection of blockages, align notch on  
top of elbow with arrow on main body. Check for blockages and  
clear if necessary. Align notch on top of elbow with arrow on main  
body to reconnect.  
9
 
HOW TO MAINTAIN  
The instructions given in this booklet serve as a guide to routine maintenance. To  
avoid unnecessary service calls, check the bag, belt, and brush roll often. Change the  
bag if it is full; replace the belt if it is stretched or cracked, and clean the brush roll  
bristles if they are wrapped with thread and hair.  
DUST BAG (Style SL)  
The dust bag plays a very important role in the efficiency of the vacuum cleaner. The  
bag traps the dirt and allows the air to pass through. If the bag becomes clogged, no  
air can pass through the cleaner and no cleaning can take place, regardless of how  
powerful the unit is. To keep the cleaner operating at maximum efficiency, change the  
dust bag frequently. Some fine particles can restrict air flow very quickly and will  
decrease performance even before the bag appears to be full. For that reason, when  
vacuuming carpet fresheners or cleaners, powder, plaster dust, or similar fine  
substances, the bag may need to be changed more often.  
NOTE: Turn off the switch and unplug the electrical cord before servicing the  
bag. Never operate the vacuum cleaner without the dust bag.  
NOTE: When cleaning new carpet for the first time, bag will fill quickly. Check  
often.  
1
Remove Front Cover  
Grasp the handle at the top of the front cover. Pull out and up to remove from the unit.  
2
Remove Used Disposable Dust Bag  
To release used bag, push top of bag retainer latch on inside of bag compartment and  
pull used bag down and out.  
3
Install New Disposable Dust Bag  
Find bag rails on the inside of the bag compartment. Locate and position the bag collar  
(notch toward front) on bag rails. Push bag collar allowing it to follow the rails up inside  
the bag compartment. Push bag release button, lock bag collar up into bag release.  
Release button. The bag is held.  
4
Replace Front Cover  
Place tabs on bottom of front cover into slots at the bottom of the bag compartment.  
Push up and against the body of cleaner until it snaps into place.  
2
Bag  
Retainer  
Latch  
1
Handle  
Bag Rails  
Bag Collar  
3
4
Slots  
Tabs  
10  
 
HOW TO MAINTAIN (continued)  
NOTE: Turn off the switch and unplug the electrical cord before servicing the  
cleaner. Never operate the vacuum cleaner without the dust bag or filters.  
FILTERS  
The filters should be checked at each disposable dust bag change. If the filters are  
dirty, clean or replace for maximum performance of your cleaner.  
1
Motor Filter  
The motor filter is located below the dust bag  
inside the bag compartment. Remove the  
front cover. Take the dust bag out to check  
the motor filter. If the motor filter is dirty,  
remove and clean or replace with a new filter.  
To clean the motor filter, brush the debris off  
into a trash bin or vacuum with another  
vacuum cleaner.  
Front Cover  
2
Exhaust Filter  
The exhaust filter is located behind the dust  
filter grille below the bag compartment.  
Remove the front cover. (The front cover has  
to be removed first to enable removal of  
exhaust grille.) Lift up on exhaust grille handle  
to remove. The filter is attached to the back  
of the grille. If the exhaust filter is dirty, remove  
and clean or replace with a new filter.  
Upper Filter  
Retainers  
1
2
To clean the exhaust filter, brush the debris  
off into a trash bin or vacuum with another  
vacuum cleaner.  
To replace the exhaust filter, tuck the bottom  
of the filter behind the two filter retainers at  
the bottom of the exhaust grille. Then place  
the top of the filter behind the two filter  
retainers at the top of the grille. Press the  
filter down on narrow pegs in the center of  
the grille. Replace the grille on the cleaner  
and replace the front cover.  
Lower  
Filter  
Retainers  
Exhaust  
Grille  
Handle  
GENUINE  
Look for the  
symbol.  
EUREKA PRODUCT  
11  
 
HOW TO MAINTAIN (continued)  
NOTE: Turn off the switch and unplug the electrical cord before servicing the  
cleaner.  
REPLACE BRUSH ROLL BELT  
1
Remove the 10 screws on the  
bottom of the power nozzle. Flip the  
power nozzle back upright and remove  
the hood.  
NOTE: The reset button cover  
(circled) is spring loaded so  
it may become displaced  
when you remove the hood.  
Keep track of reset button and  
spring.  
Cog  
Pulley  
2
Remove broken brush roll belt.  
Pinch new brush roll belt together and  
position new belt so teeth engage cog  
pulley on end of motor shaft.  
3
Place the other end of belt around  
brush roll. Align left end of brush roll into  
the base by rotating slightly until brush  
roll end cap slides into place.  
Secure right end of brush roll into base.  
4
The brush roll belt is now installed.  
5
Make sure the reset button  
cover (circled) is in position on spring.  
Replace hood. Hold body and power  
nozzle, turn over so bottom of power  
nozzle is facing up. Replace screws.  
Brush Roll  
As the brush roll rotates, it sweeps and combs the carpet nap. Remove hair and threads  
from the brush roll so it continues brushing the carpet nap. Check brush roll occasion-  
ally for hair or string that may have wrapped around dowel. Remove with scissors.  
When bristles have worn to about 1/4" in length, carpet cleaning effectiveness will be  
reduced. It is time to replace the brush roll. Follow the instructions in the brush roll belt  
section to open up the power nozzle and replace the brush roll.  
12  
 
 
 
RANTY  
LMITEDW  
THUREKA  
 
©1999 White Consolidated Ind., Inc.  
Printed in China  
Part No. 70734 (1/01)  
 

Code Alarm Remote Starter CA 4050 User Manual
Coleman Stove 5466 User Manual
Craftsman Lawn Mower 917388191 User Manual
Elation Professional Indoor Furnishings Power Wash 575E User Manual
Electro Voice Speaker System HP1240 User Manual
Extron electronic Network Card MGP 464W Series User Manual
Fisher Price Automobile Parts C2474 User Manual
Fisher Price Motorized Toy Car x4189 User Manual
Flymo Lawn Mower 350 400 User Manual
Genesis Advanced Technologies Cordless Saw GCS100 User Manual