Global Machinery Company Portable Generator LSSLV User Manual

INSTRUCTION MANUAL  
Self Leveling  
Vertical Line  
Generator  
• Melbourne • Perth  
• Auckland • Hong Kong  
• Shanghai • Taipei  
• New York • Verona  
• London • Paris  
LSSLV  
wnload from Www.Somanuals.com. All Manuals Searc0h40A7n02dEDD0o4wnlo  
SF  
Full 2 Years Home Use Warranty  
Contents  
Whilst every effort is made to ensure your complete satisfaction with  
this tool, occasionally, due to the mass manufacturing techniques, a  
tool may not live up to our required level of performance and you may  
need the assistance of our service department.  
Warranty  
2
3
3
3
3
4
4
6
7
7
7
8
8
9
9
Introduction  
This product is warranted for a 2-year period for home domestic use  
from the date of the original purchase. If found to be defective in  
materials or workmanship, the tool or the offending faulty component  
will be replaced free of charge with another of the same item. A small  
freight charge may apply.  
Environmental protection  
Scope of product  
Description of symbols  
Safety rules for laser line generator  
Additional safety rules for laser line generator  
Know your product  
The warranty replacement unit is only made available by returning the  
tool to the place of purchase with a confirmed register receipt. Proof  
of purchase is essential. We reserve the right to reject any claim where  
the purchase cannot be verified.  
Changing the laser line generator batteries  
Operating the laser line generator  
Selecting the mounting method  
Projection of a vertical laser line on the floor  
Projection of laser line when fixed on a wall  
Maintenance  
This warranty does not include damage or defects to the tool caused  
by or resulting from abuse, accidents, alterations or commercial or  
business use.  
It also does not cover any bonus accessories unless the tool is a GMC  
Platinum Professional model.  
Please ensure that you store your receipt in a safe place.  
Conditions apply to the above warranty.  
Troubleshooting  
If you need direction of what constitutes a free of charge warranty  
claim, please review the guide given on the rear of the Receipt Holder.  
An indication is given as to the types of claim that are permissible,  
and those that are not.  
 
2
3
Dear Customer  
Description of symbols  
The rating plate on your tool may show symbols. These represent important  
information about the product or instructions on its use.  
If you require any help with your product, whether it is a Warranty  
claim, spare part or user information, please phone our Help Line for  
an immediate response. Phone 1300 880 001 in Australia or  
0800 445 721 in New Zealand.  
Conforms to relevant standards for  
electromagnetic compatibility.  
Introduction  
Do not stare into beam. Only turn laser beam on when tool is on  
work piece. Class 2 laser product.  
Your new GMC laser hand tool will more than satisfy your expectations.  
It has been manufactured under stringent GMC Quality Standards to  
meet superior performance criteria.  
Specifications  
You will find your new tool easy and safe to operate, and, with proper  
care, it will give you many years of dependable service.  
Recommended Use:  
Length of laser line:  
Laser diode type:  
Laser class:  
Indoor  
Up to 10m  
Caution. Carefully read through this entire Instruction Manual before  
using your new GMC laser hand tool. Take special care to heed the  
Cautions and Warnings.  
Red laser diode 635 - 650nm  
Class 2, maximum power output less than or equal to 1mW  
Operation area:  
Up to 10m distance  
100°  
Your GMC laser hand tool has many features that will make your job  
faster and easier. Safety, performance, and dependability have been  
given top priority in the development of this tool, making it easy to  
maintain and operate.  
Laser fan beam angle:  
Self-leveling range:  
Leveling time:  
+/- 3°  
<5 second  
Vertical line accuracy (end to end): +/-3.1mm at 4.8 metres  
Environmental protection  
Line width accuracy:  
Power supply:  
<3.1mm at 4.8 metres  
Recycle unwanted materials instead of disposing of them  
as waste. All tools, hoses and packaging should be sorted,  
taken to the local recycling centre and disposed of in an  
environmentally safe way.  
2 x AA 1.5 volt batteries (not supplied)  
40 hours typical of continuous use with alkaline batteries  
-1°C to 40°C  
Battery life:  
Operation temperature:  
CAUTION. Laser radiation is emitted from the line generator.  
 
4
5
Safety rules for self leveling vertical line generators  
The self leveling vertical line generator is Class 2 with maximum 1mW and  
635 - 650nm wavelengths. These lasers do not normally present an optical  
hazard, although staring at the beam may cause flash blindness.  
Additional safety rules for self leveling vertical line  
generators  
The self leveling vertical line generator emits a laser fan beam, which acts  
like an invisible surface in the actual three dimensions space. When used  
indoors, it generates a visible laser line on the surfaces the laser fan beam  
crosses.  
Warning. Do not stare directly at the laser beam.  
A hazard may exist if you deliberately stare into the beam, please observe  
all safety rules as follows;  
The self leveling vertical line generator is a Class 2 laser tool and complies  
with Australian standards, AS 2397 and AS/NZS2211.  
The laser shall be used and maintained in accordance with the  
manufacturer’s instructions.  
WARNING. Read and understand all instructions. Failure to follow all  
instructions may result in hazardous radiation exposure, electric shock, fire  
and/or bodily injury.  
Never aim the beam at any person or an object other than the work piece.  
The laser beam shall not be deliberately aimed at personnel and shall be  
prevented from being directed towards the eye of a person for longer than 0.25s.  
Do not remove or deface any labels. Removing labels increases the risk of  
exposure to laser radiation.  
Always ensure the laser beam is aimed at a sturdy work piece without  
reflective surfaces. I.e. wood or rough coated surfaces are acceptable.  
Bright shiny reflective sheet steel or the like is not suitable for  
laser use as the reflective surface could direct the beam back at  
the operator.  
Do not change the laser light assembly with a different type.  
Repairs must only be carried out by the laser manufacturer or  
Do not stare directly at the laser beam as serious eye injury could result.  
Do not project the laser beam directly into the eyes of others.  
Do not place the laser in a position which may cause anyone to stare  
into the laser beam intentionally or unintentionally.  
Do not use optical tools such as a telescope or transit to view the laser  
beam.  
an authorised agent.  
LSSLV Self Leveling  
Do not operate the self leveling vertical line generator around children or  
allow children to operate the tool.  
CAUTION: Use of controls or adjustments or performance  
of procedures other than those specified herein may result  
in hazardous radiation exposure.  
Vertical Line Generator  
Keep children and bystanders away while operating the self leveling  
vertical line generator.  
Please refer to the relevant Australian standards, AS 2397  
and AS/NZS2211 for more information on Lasers.  
 
6
7
Turn the self leveling vertical line generator off when it is not in use.  
Leaving the laser on increases the risk of staring into the laser beam.  
Know your product  
This REDEYE® self leveling vertical line generator is a high quality tool.  
It can be leveled on a horizontal surface or tripod stand. It projects an  
vertical laser line.  
Do not operate the self leveling vertical line generator in explosive  
atmospheres, such as in the presence of flammable liquids, gases, or  
dust.  
This tool is easy to use in many applications from simple home decorating  
projects to house building. Every place it can project an vertical line  
adjusted automatically while it’s placed on a horizontal surface.  
Position the self leveling vertical line generator securely. Damage to the  
self leveling vertical line generator or some injury could result if the unit  
falls.  
This REDEYE® self leveling vertical line generator is not calibrated as a  
height measuring device and should not be used as such. It will give a  
reference mark when used as a hand-held tool.  
Use only accessories that recommended by the manufacturer for  
your model. Accessories that may be suitable for a specific laser line  
generator, may create a risk of injury when used on another self leveling  
vertical line generator.  
1. On/Off switch  
2. Bubble vial  
1
2
Repairs and servicing can be only performed by a qualified repair facility.  
Repairs performed by unqualified personnel could result in serious injury.  
3. Battery cover  
4. Vertical adjusting dial  
5. Laser aperture  
6. Tripod mount  
Do not disassemble the self leveling vertical line generator. Disassembling  
the unit will void all warranties on the product.  
Do not disassemble any part of the product except removing the batteries  
cap when replacing batteries.  
5
Do not modify the product. Modifying the product in any way may result  
in hazardous laser radiation exposure.  
Use of control or performance of procedures other than those specified in  
this manual may result in hazardous laser radiation exposure.  
3
Keep work area clean and well lit. Cluttered and dark areas invite  
accidents.  
6
4
 
8
9
Changing the self leveling vertical line generator  
batteries  
Operating the self leveling  
vertical line generator  
1. Ensure that the self leveling  
vertical line generator is  
switched OFF by checking that  
the laser switch (1) is in the  
“0” position  
1. To switch the self leveling vertical  
line generator on, push the laser  
switch (1) forward until it stops  
in “1” position.  
2. To swtich the self leveling vertical  
line generator OFF, push the  
switch backward until it stops in  
“0” position.  
2. Unclip the battery cover (3).  
3. Remove and replace both AA  
batteries, taking care to insert  
the new batteries with the  
correct polarity.  
WARNING: When turning on the self leveling  
vertical line generator ALWAYS be aware of  
protecting the eyes of yourself and those  
around you. NEVER point the self leveling  
vertical line generator at anyone’s face,  
including your own.  
4. Replace the battery cover (3) and shut the cover back to the position in  
place.  
CAUTION. Remove the self leveling vertical line generator when the tool  
is to be stored without use for a few days or more. If left in position, the  
batteries might leak and damage the laser light assembly. Damage due to  
leaking batteries is not covered under warranty.  
Failure to heed this warning could result in  
serious injury.  
Before using the self leveling vertical line  
generator, it is important to ensure that the  
unit is leveled.  
1. Place the unit on a flat surface and check  
the bubble vial (2). If the air bubble is  
located inside the black circle, then you  
can proceed.  
 
10 11  
If the air bubble is outside of the black circle, follow these recommend  
adjustment steps:  
Suggestion: A tripod with an adjustable plate may be the best tool to use,  
to ensure the self leveling vertical line generator is in a level position.  
It is important to check if the unit has been placed on a level surface.  
Caution: Ensure the switch is in “0” position during adjustment.  
The diagrams below illustrate the correct positioning of the unit.  
Projecting Level Vertical Laser Line  
If the unit is relatively flat, you can use the adjustment dial (4) to make  
adjustment only on the vertical plane.  
When the self leveling  
vertical line generator is  
located in level position:  
If the surface is not flat on a horizontal plain, you have a few options:  
Use a flat piece of material (books, block of timber)  
Use a tripod  
Ensure the laser  
aperture (5) of the  
tool faces the wall  
which will be used for  
projecting the laser  
“chalk line.  
Switch on the self leveling vertical line generator, you will see the vertical  
laser line swaying on the wall, whilst it automatically adjusts itself.  
This process will take approximately 5 seconds where you will see  
eventually a steady vertical laser “chalk line.  
Once the vertical laser “chalk line” has steadied, position the “chalk  
line” to your target position.  
 
12  
13  
10.DO NOT modify the tool in any way or use the tool with  
products and/or accessories not specified in this instruction manual, this  
could expose the user to hazardous laser radiation exposure.  
Maintenance  
This product has been designed to be a low-maintenance tool. However, in order  
to maintain its performance, you must ALWAYS follow these simple directions.  
11.DO NOT attempt to change any part of the laser lens.  
1. ALWAYS handle the tool with care. Treat it as you would any optical  
device, such as a camera or binoculars.  
NOTE: This tool is not to be tampered with and should only be repaired by  
a qualified Service Technician with laser experience.  
2. AVOID exposing the self leveling vertical line generator to shock,  
continuous vibration or extreme hot or cold temperatures.  
Troubleshooting  
3. ALWAYS store the self leveling vertical line generator indoors. When  
not in use, ALWAYS store the self leveling vertical line generator in its  
protective case.  
Problem  
Possible cause  
Solution  
Batteries are weak.  
Replace with fresh batteries.  
Laser line  
projection is  
weak.  
4. When you are finished using the tool, ALWAYS make sure that the switch  
is in “0” position.  
5. ALWAYS keep the product free of dust and liquids. Use a damp cloth and  
mild soap to clean the tool. If needed, ONLY USE a soft cloth or cotton  
swab and glass cleaner to clean the lens.  
Light in area is too  
bright.  
Use laser enhancing glasses.  
Replace with fresh batteries.  
Laser line is  
hard to see  
Batteries are weak.  
WARNING: ALWAYS remove the batteries when cleaning lens.  
6. ALWAYS clean and thoroughly dry the tool after each use.  
Power switch is not  
“on”  
Check to be sure the power  
switch has been pushed  
forward and is in the “1”  
position.  
Laser light is  
not projected.  
7. Check the batteries regularly to avoid deterioration. ALWAYS remove  
the batteries from the tool, if it is not going to be used for an extended  
period of time.  
8. Replace the batteries after approximately 40 hours of use.  
The tool is not placed  
on a horizontal surface  
or the declining angle  
of it is beyond ±3°.  
Replace the tool on a  
Laser line  
projected is  
not upright.  
horizontal surface and make  
sure the laser line can sway  
after the tool is turned on.  
9. DO NOT disassemble the self leveling vertical line generator.. This will not  
only void the warranty, but could expose the user to hazardous radiation  
exposure.  
 
14 15  

Cisco Systems Network Router 1602I User Manual
Coleman Indoor Fireplace 5062 710 User Manual
Continental Electric Food Processor CE22381 User Manual
Continental Electric Toaster CE23411 User Manual
Cooper Lighting Indoor Furnishings CA7042 User Manual
Cub Cadet Snow Blower 928 SWE User Manual
Cuisinart Espresso Maker EM 200 User Manual
Cuisinart Mixer CHM 3 User Manual
Desa Water Heater CGD3018N User Manual
Dynacord Car Amplifier DPA 4410 User Manual