Global Machinery Company Soldering Gun DEC006PSI User Manual

100W  
1
2
6
SOLDERING  
3
4
5
7
1. Soldering tip  
2. Tip release screw  
3. Light  
4. Trigger  
5. Rubber handle  
6. Shaft  
GUN  
DEC006PSI  
7. Cord protector  
Full 2 years home use warranty  
Description of symbols  
Personal safety  
Whilst every effort is made to ensure your complete satisfaction with  
this tool, occasionally, due to the mass manufacturing techniques,  
a tool may not live up to our required level of performance and you  
may need the assistance of our service department.  
The rating plate on your tool may show symbols. These represent  
important information about the product or instructions on its use.  
Stay alert, watch what you are doing and use common  
sense when operating a power tool. Do not use a power  
tool while you are tired or under the influence of drugs,  
alcohol, or medication. A moment of inattention while  
operating power tools may result in serious personal injury.  
Read instruction manual.  
This product is warranted for a 2-year period for home domestic  
use from the date of the original purchase. If found to be defective  
in materials or workmanship, the tool or the offending faulty  
component will be replaced free of charge with another of the  
same item. A small freight charge may apply.  
Wear hearing protection.  
Wear eye protection.  
Wear breathing protection.  
Use safety equipment. Always wear eye protection.  
Safety equipment such as a dust mask, non-skid safety  
shoes, hard hat, or hearing protection use.  
Double insulated for additional protection.  
Avoid accidental starting. Ensure the switch is in the  
off-position before plugging in. Carrying power tools with  
your finger on the switch or plugging in power tools that  
have the switch on invites accidents.  
The warranty replacement unit is only made available by  
returning the tool to the place of purchase with a confirmed  
register receipt. Proof of purchase is essential. We reserve the  
right to reject any claim where the purchase cannot be verified.  
Conforms to relevant standards  
for electromagnetic compatibility.  
Remove any adjusting key or wrench before turning the  
tool on. A wrench or a key that is left attached to a rotating  
part of the power tool may result in personal injury.  
Specifications  
This warranty does not include damage or defects to the tool  
caused by or resulting from abuse, accidents, alterations or  
commercial or business use.  
Input power:  
Power supply:  
Heat up time:  
Cord length:  
Tool weight:  
100W  
230-240Vac ~ 50 Hz  
6 - 8 seconds (approximately)  
1.4m  
Do not overreach. Keep proper footing and balance at  
all times. This enables better control of the power tool in  
unexpected situations.  
It also does not cover any bonus accessories unless the tool  
is a GMC Platinum Professional model.  
Please ensure that you store your receipt in a safe place.  
Dress properly. Do not wear loose clothing or jewellery.  
Keep your hair, clothing and gloves away from moving  
parts. Loose clothes, jewellery or long hair can be caught  
in moving parts.  
0.7kg  
Conditions apply to the above warranty.  
If you need direction of what constitutes a free of charge warranty  
claim, please review the guide given on the rear of the Receipt  
Holder. An indication is given as to the types of claim that are  
permissible, and those that are not.  
Safety instructions  
WARNING. Read and understand all instructions. Failure to follow  
all instructions listed below may result in electric shock, fire and/or  
serious injury. The term “power tool” in all of the warnings below  
refers to your mains-operated (corded) power tool or battery-  
operated (cordless) power tool.  
If devices are provided for the connection of dust  
extraction and collection facilities ensure that these  
are connected and properly used. Use of these devices  
can reduce dust-related hazards.  
Dear customer  
If you require any help with your product, whether it  
is a Warranty claim, spare part or user information,  
please phone our Help Line for an immediate response.  
Power tool use and care  
Save these instructions  
Work area  
Do not force the power tool. Use the correct power tool  
for your application. The correct power tool will do the job  
better and safer at the rate for which it was designed.  
Phone 1300 880 001 in Australia  
or 0800 445 721 in New Zealand.  
Keep work area clean and well lit. Cluttered and dark  
areas invite accidents.  
Do not use the power tool if the switch does not turn  
it on and off. Any power tool that cannot be controlled  
with the switch is dangerous and must be repaired.  
Introduction  
Do not operate power tools in explosive atmospheres,  
such as in the presence of flammable liquids, gases,  
or dust. Power tools create sparks which may ignite the  
dust or fumes.  
Your new GMC power tool will more than satisfy your expectations.  
It has been manufactured under stringent GMC Quality  
Standards to meet superior performance criteria.  
Disconnect the plug from the power source before  
making any adjustments, changing accessories, or  
storing power tools. Such preventive safety measures  
reduce the risk of starting the power tool accidentally.  
Keep children and bystanders away while operating  
a power tool. Distractions can cause you to lose control.  
You will find your new tool easy and safe to operate, and, with  
proper care, it will give you many years of dependable service.  
Store idle power tools out of the reach of children  
and do not allow persons unfamiliar with the power tool  
or these instructions to operate the power tool. Power  
tools are dangerous in the hands of untrained users.  
Electrical safety  
Caution  
If cordset is damaged have it replaced by an authorised  
service centre.  
Carefully read through this entire Instruction Manual before  
using your new GMC Power Tool. Take special care to heed  
the Cautions and Warnings.  
Maintain power tools. Check for misalignment or binding of  
moving parts, breakage of parts and any other condition that  
may affect the power tool’s operation. If damaged, have the  
power tool repaired before use. Many accidents are caused  
by poorly maintained power tools.  
Power tool plugs must match the outlet. Never modify the  
plug in any way. Do not use any adapter plugs with earthed  
(grounded) power tools. Unmodified plugs and matching  
outlets will reduce risk of electric shock.  
Your GMC power tool has many features that will make your job  
faster and easier. Safety, performance, and dependability have  
been given top priority in the development of this tool, making it  
easy to maintain and operate.  
Avoid body contact with earthed or grounded surfaces  
such as pipes, radiators, ranges and refrigerators.  
There is an increased risk of electric shock if your body  
is earthed or grounded.  
Keep cutting tools sharp and clean. Properly maintained  
cutting tools with sharp cutting edges are less likely to bind  
and are easier to control.  
Environmental protection  
Recycle unwanted materials instead of disposing  
of them as waste. All tools, hoses and packaging  
should be sorted, taken to the local recycling centre  
and disposed of in an environmentally safe way.  
Use the power tool, accessories and tool bits etc., in  
accordance with these instructions and in the manner  
intended for the particular type of power tool, taking  
into account the working conditions and the work to  
be performed. Use of the power tool for operations different  
from intended could result in a hazardous situation.  
Do not expose power tools to rain or wet conditions.  
Water entering a power tool will increase the risk of  
electric shock.  
Do not abuse the cord. Never use the cord for carrying,  
pulling or unplugging the power tool. Keep cord away  
from heat, oil, sharp edges or moving parts. Damaged or  
entangled cords increase the risk of electric shock.  
Service  
Have your power tool serviced by a qualified repair  
When operating a power tool outdoors, use an outdoor  
extension cord suitable for outdoor use. Use of a cord  
suitable for outdoor use reduces the risk of electric shock.  
personnel using only identical replacement parts. This  
will ensure that the safety of the power tool is maintained.  
When operating a power tool outdoors, use an outdoor  
extension cord suitable for outdoor use. Use of a cord  
suitable for outdoor use reduces the risk of electric shock.  
Code: DEC006PSI  
Date: 060223  
Black  
Edition: 4  
Op: DCR  
 

Cuisinart Grill Accessory CFGS 150 User Manual
Dodge Automobile 2004 Ram 1500 User Manual
Dukane Projector INS VVDUK105 User Manual
Dynacord Music Mixer 1000 3 User Manual
Edimax Technology Network Card pmn80211b g WLAN USB adapter with Wi Fi Detector User Manual
Electro Voice Portable Speaker FM 1202ER User Manual
Euro Pro Iron GI460 W User Manual
Everex Personal Computer eXplora User Manual
Extron electronic TV Cables RG6 User Manual
Fellowes Paper Shredder PS 70 User Manual