Generac Portable Generator RD01523ADSE User Manual

®
Protector™  
Series  
Standby Generators  
Diesel Engine  
1 of 6  
Not for sale outside of US/CA  
INCLUDES:  
Standby Power Rating  
Two Line LCD Multilingual Digital  
Evolution™ Controller (English/Spanish/  
French/Portuguese) with external viewing  
window for easy indication of generator  
status and breaker position.  
Model RD015 (Gray) - 15 kW 60 Hz  
Model RD020 (Gray) - 20 kW 60 Hz  
Model RD030 (Gray) - 30 kW 60 Hz  
Model RD048 (Gray) - 48 kW 60 Hz (single phase only)  
Model RD050 (Gray) - 50 kW 60 Hz (three phase only)  
• Isochronous Electronic Governor  
• Sound Attenuated Enclosure  
• Smart Battery Charger  
• UV/Ozone Resistant Hoses  
• ±1% Voltage Regulation  
• Integrated Base Tank Provides 24 Hour  
Run Time Minimum at 1/2 Load  
• 5 Year Limited Warranty  
• UL/CUL2200/UL 142 Listed  
• Meets code requirements for External  
Vent and Fill  
Meets EPA Emission Regulations  
CA/MA Emissions Compliant  
FEATURES  
¡
INNOVATIVE DESIGN & PROTOTYPE TESTING are key components of  
GENERAC’S success in “IMPROVING POWER BY DESIGN.” But it  
doesn’t stop there. Total commitment to component testing, reliability  
testing, environmental testing, destruction and life testing, plus testing  
to applicable CSA, NEMA, EGSA, and other standards, allows you to  
choose GENERAC POWER SYSTEMS with the confidence that these  
systems will provide superior performance.  
¡
SOLID-STATE, FREQUENCY COMPENSATED VOLTAGE REGULATION.  
This state-of-the-art power maximizing regulation system is standard on  
all Generac models. It provides optimized FAST RESPONSE to changing  
load conditions and MAXIMUM MOTOR STARTING CAPABILITY by  
electronically torque-matching the surge loads to the engine. Digital  
voltage regulation at ±1%.  
¡
¡
SINGLE SOURCE SERVICE RESPONSE from Generac’s extensive dealer  
network provides parts and service know-how for the entire unit, from the  
engine to the smallest electronic component.  
¡
TEST CRITERIA:  
PROTOTYPE TESTED  
SYSTEM TORSIONAL TESTED  
NEMA MG1-22 EVALUATION  
MOTOR STARTING ABILITY  
GENERAC TRANSFER SWITCHES. Long life and reliability are  
synonymous with GENERAC POWER SYSTEMS. One reason for this  
confidence is that the GENERAC product line includes its own transfer  
systems and controls for total system compatibility.  
 
®
15 • 20 • 30 • 48 • 50 kW  
application & engineering data  
ENGINE SPECIFICATIONS: 15 & 20 kW  
ENGINE LUBRICATION SYSTEM  
Make  
Generac  
Oil Pump Type  
Gear  
Model  
In-line  
Oil Filter Type  
Full flow spin-on canister  
Cylinders  
4
6.87/6.5 - 15 & 20 kW  
6.8/6.4 - 30 kW  
3 of 6  
Crankcase Capacity (quarts/liters)  
Displacement (Liters)  
Bore (in./mm)  
Stroke (in./mm)  
Compression Ratio  
Intake Air System  
Cylinder Head Type  
Piston Type  
2.28  
7.4/7 - 48 & 50 kW  
3.46/88  
3.70/94  
ENGINE COOLING SYSTEM  
21.3:1  
Pressurized radiator - 15 & 20 kW  
Closed recovery - 30, 48 & 50 kW  
Type  
Naturally Aspirated  
Cast Iron OHV  
Aluminum  
Emergency Stationary  
Water Pump  
Pre-lubed, self-seating  
1800 - 15 & 20 kW  
2061 - 30 kW  
Fan Speed (rpm)  
EPA Emissions Compliance  
2029 - 48 & 50 kW  
ENGINE SPECIFICATIONS: 30 kW  
Make  
18.11/460 (15 & 20 kW) or  
22/559 (30, 48 & 50 kW)  
Fan Diameter (in/mm)  
Fan Mode  
Generac  
Model  
In-line  
Pusher  
Cylinders  
4
FUEL SYSTEM  
Fuel Type  
Displacement (Liters)  
Bore (in/mm)  
2.4  
Ultra Low Sulfur Diesel Fuel  
Mechanical Engine Driven Gear  
Mechanical  
3.54/90  
Fuel Pump Type  
Stroke (in/mm)  
3.70/94  
Injector Type  
Compression Ratio  
Intake Air System  
Cylinder Head Type  
Piston Type  
21.3:1  
Fuel Supply Line (mm/in)  
Fuel Return Line (mm/in)  
Fuel Specification  
Fuel Filtering (microns)  
7.94/0.31 (ID)  
Turbocharged  
Cast Iron OHV  
Aluminum  
Emergency Stationary  
7.94/0.31(ID)  
ASTM  
5 (15, 20 & 30 kW)  
or 10 (48 & 50 kW)  
EPA Emissions Compliance  
ENGINE SPECIFICATIONS: 48/50 kW  
TANK SPECIFICATIONS  
Make  
Generac  
Total Size (gallons/liters)  
34/128.7 - 15 & 20 kW  
Model  
In-Line  
62/234.7 - 30, 48 & 50 kW  
Cylinders  
4
Usable Size (gallons/liters)  
Run Time @ 1/2 Load (hrs)  
32/121.1 - 15 & 20 kW  
Displacement (Liters)  
Bore in/mm  
3.4  
57/215.8 - 30, 48 & 50 kW  
3.86/98  
38 - 15 kW  
28.6 - 20 kW  
Stroke in/mm  
Compression Ratio  
Intake Air System  
Cylinder Head Type  
Piston Type  
4.45/113  
36.7 - 30 kW  
18.5:1  
24 - 48 & 50 kW  
Turbocharged/Aftercooled  
Cast Iron OHV  
Aluminum  
Emergency Stationary  
Listings  
UL142  
EPA Emissions Compliance  
 
®
15 • 20 • 30 • 48 • 50 kW  
operating data  
GENERATOR OUTPUT VOLTAGE/kW - 60 Hz  
kW (Standby)  
Amp (Standby)  
CB Size  
70  
120/240 V, 1Ø, 1.0 pf  
15  
15  
15  
20  
20  
20  
30  
30  
30  
30  
48  
50  
50  
50  
62  
52  
RD015  
RD020  
120/208 V, 3Ø, 0.8 pf  
120/240 V, 3Ø, 0.8 pf  
120/240 V, 1Ø, 1.0 pf  
120/208 V, 3Ø, 0.8 pf  
120/240 V, 3Ø, 0.8 pf  
120/240 V, 1Ø, 1.0 pf  
120/208 V, 3Ø, 0.8 pf  
120/240 V, 3Ø, 0.8 pf  
277/480 V, 3Ø, 0.8 pf  
120/240 V, 1Ø, 1.0 pf  
120/208 V, 3Ø, 0.8 pf  
120/240 V, 3Ø, 0.8 pf  
277/480 V, 3Ø, 0.8 pf  
60  
45  
50  
83  
100  
80  
4 of 6  
69  
60  
70  
125  
104  
90  
150  
125  
100  
50  
RD030  
45  
200  
173  
150  
75  
200  
200  
175  
90  
RD048/RD050  
SURGE CAPACITY IN AMPS  
ENGINE FUEL CONSUMPTION  
Voltage Dip @ < .4 pf  
gal/hr  
0.51  
0.79  
1.14  
1.48  
0.67  
1.05  
1.52  
1.98  
0.92  
1.45  
1.96  
2.74  
1.35  
2.15  
3.06  
3.98  
L/hr  
1.93  
2.99  
4.31  
5.58  
2.6  
15%  
53  
37  
32  
87  
59  
51  
66  
59  
51  
26  
69  
90  
78  
36  
30%  
129  
90  
25% of rated load  
120/240 V, 1Ø  
50% of rated load  
RD015  
RD015  
RD020  
120/208 V, 3Ø  
120/240 V, 3Ø  
120/240 V, 1Ø  
120/208 V, 3Ø  
120/240 V, 3Ø  
120/240 V, 1Ø  
120/208 V, 3Ø  
120/240 V, 3Ø  
277/480 V, 3Ø  
120/240 V, 1Ø  
120/208 V, 3Ø  
120/240 V, 3Ø  
277/480 V, 3Ø  
75% of rated load  
78  
100% of rated load  
25% of rated load  
211  
143  
124  
168  
144  
125  
64  
50% of rated load  
RD020  
3.97  
5.32  
7.48  
3.5  
75% of rated load  
100% of rated load  
25% of rated load  
RD030  
50% of rated load  
RD030  
5.5  
75% of rated load  
7.4  
189  
218  
189  
87  
100% of rated load  
25% of rated load  
10.4  
4.92  
8.71  
12.5  
16.36  
RD048/RD050  
50% of rated load  
RD048/RD050  
75% of rated load  
100% of rated load  
STANDBY RATING: Standby ratings apply to installations served by a reliable utility source. The standby rating is applicable to varying loads for the duration of a power outage. There  
is no overload capability for this rating. Ratings are in accordance with ISO-3046-1. Design and specifications are subject to change without notice.  
 
®
15 • 20 • 30 • 48 • 50 kW  
operating data  
ENGINE COOLING  
15 kW  
2824/80  
2.8/10.6  
63,535/67  
20 kW  
2824/80  
2.8/10.6  
63,535/67  
30 kW  
48/50 kW  
Air flow (inlet air including alternator and combustion air in cfm/cmm)  
System coolant capacity (gal/liters)  
3038/86  
2.8/10.6  
2824/80  
2.8/10.6  
5 of 6  
Heat rejection to coolant (BTU per hr/MJ per hr)  
Maximum operation air temperature on radiator (°C/°F)  
Maximum ambient temperature (°C/°F)  
111,000/117.1  
135,900/143.4  
50/122  
50/122  
COMBUSTION REQUIREMENTS  
Flow at rated power (cfm/cmm)  
190/5.38  
190/5.38  
190/2.55  
190/5.38  
SOUND EMISSIONS  
Exercising at 7 meters/23 feet (dB(A))  
65  
70  
Normal operation at 7 meters/23 feet (dB(A))  
*Sound levels are taken from the front of the generator. Sound levels taken from other sides of the generator may be higher depending on installation parameters.  
EXHAUST  
Exhaust flow at rated output (cfm/cmm)  
Exhaust temperature at rated output (°C/°F)  
448/12.7  
448/12.7  
230/6.51  
448/12.7  
604.4/1120  
604.4/1120  
454.4/850  
604.4/1120  
ENGINE PARAMETERS  
Rated Synchronous RPM  
HP at rated kW  
1800  
26.4  
33.5  
49  
85  
POWER ADJUSTMENT FOR AMBIENT CONDITIONS  
Temperature Deration .................................................................................................................3% for every 5 °C above 25 °C or 1.7% for every 5 °F above 77 °F  
Altitude Deration (15, 30, 48 & 50 kW) .............................................................................1% for every 100 m above 915 m or 3% for every 1000 ft above 3000 ft  
Altitude Deration (20 kW) ................................................................................................ 1% for every 100 m above 305 m or 3% for every 1000 ft above 1000 ft  
CONTROLLER FEATURES  
2-Line Plain Text Multilingual LCD Display.....................................................................................................................Simple user interface for ease of operation.  
Mode Buttons: Auto............................................................................................................................................Automatic Start on Utility failure. 7 day exerciser.  
Manual....................................................................................... Start with starter control, unit stays on. If utility fails, transfer to load takes place.  
Off.........................................................................................................................Stops unit. Power is removed. Control and charger still operate.  
Ready to Run/Maintenance Messages ................................................................................................................................................................................Standard  
Engine Run Hours Indication..............................................................................................................................................................................................Standard  
Programmable start delay between 2-1500 seconds .........................................................................................................Standard (programmable by dealer only)  
Utility Voltage Loss/Return to Utility Adjustable ....................................................................................................................................From 140-171 V/190-216 V  
Future Set Capable Exerciser/Exercise Set Error Warning....................................................................................................................................................Standard  
Run/Alarm/Maintenance Logs .................................................................................................................................................................................50 Events Each  
Engine Start Sequence ................................................................................................................... Cyclic cranking: 16 sec on, 7 rest (90 sec maximum duration).  
Starter Lock-out ...............................................................................................................................Starter cannot re-engage until 5 sec after engine has stopped.  
Smart Battery Charger .......................................................................................................................................................................................................Standard  
Charger Fault/Missing AC Warning.....................................................................................................................................................................................Standard  
Low Battery/Battery Problem Protection and Battery Condition Indication ........................................................................................................................... Standard  
Automatic Voltage Regulation with Over and Under Voltage Protection ............................................................................................................................... Standard  
Under-Frequency/Overload/Stepper Overcurrent Protection.................................................................................................................................................Standard  
Safety Fused/Fuse Problem Protection...............................................................................................................................................................................Standard  
Automatic Low Oil Pressure/High Oil Temperature Shutdown .............................................................................................................................................Standard  
Overcrank/Overspeed (@ 72 Hz)/RPM Sense Loss Shutdown ...........................................................................................................................................Standard  
High Engine Temperature Shutdown ..................................................................................................................................................................................Standard  
Internal Fault/Incorrect Wiring Protection ...........................................................................................................................................................................Standard  
Common External Fault Capability .....................................................................................................................................................................................Standard  
Field Upgradable Firmware ................................................................................................................................................................................................Standard  
 
®
15 • 20 • 30 • 48 • 50 kW  
available accessories  
Model #  
Product  
Description  
The 5-gallon spill box screws into the existing fuel fill port of the base tank. It captures and  
contains fuel if over fueling or spilling occurs during the fill process.  
006502-0  
Spill Box  
The 90% fuel level alarm alerts the fuel fill operator when the tank reaches a 90% fill level by  
sounding an audible alarm and triggering an LED warning light.  
006504-0  
90% Fuel Level Alarm  
Tank Risers  
6 of 6  
006505-0 - 15 & 20 kW  
006506-0 - 30 & 50 kW  
Tank risers are required in some municipalities to help avoid potential base tank corrosion  
caused by mounting on rough surfaces.  
A powder coat painted, steel fuel fill drop tube is required in some municipalities to prevent  
sparking due to static electricity buildup, which can be caused by the fuel dropping into the  
tank from the fill area. Using a drop tube also results in submerged filling, which increases  
the fuel delivery flow rate and reduces vapors, foam and potential tank evaporation.  
006507-0  
Fuel Fill Drop Tube  
006513-0 - 15 & 20 kW  
006517-0 - 30 kW  
006516-0 - 50 kW  
Some municipalities require the use of stainless steel fuel lines instead of the standard hoses  
Stainless Steel Fuel Lines provided with the diesel generator products. These stainless steel lines are fire resistant for  
additional safety.  
E-stop allows for immediate fuel shutoff and generator shutdown in the event of an  
emergency.  
006510-0  
006511-0  
006512-0  
E-Stop  
The spill box drainback kit allows fuel that was captured in the 5-gallon spill box to be drained  
directly back into the fuel tank to avoid vapors.  
Spill Box Drainback Kit  
The cast iron, lockable fuel cap provides the ability to lock the fuel system to prevent  
unwanted fuel tampering or fuel siphoning.  
Lockable Fuel Cap  
006572-0 - 15 & 20 kW  
006571-0 - 30 kW  
006570-0 - 50 kW  
The Protector Maintenance Kits offer all the hardware necessary to perform complete  
maintenance on Generac Protector generators.  
Maintenance Kits  
006560-0 - 15 & 20 kW  
006559-0 - 30 kW  
006558-0 - 50 kW  
Recommended for generators installed in regions where the temperature regularly falls below  
32 °F (0 °C). The Cold Weather Kits consist of a block heater with all necessary mounting  
hardware and a battery warmer with a thermostat built into the battery wrap.  
Cold Weather Kits  
Fuel Maintenance Kit  
Paint Kit  
The Fuel Maintenance Kit contains everything needed to maintain and clean a diesel fuel  
system  
006576-0  
If the generator enclosure is scratched or damaged, it is important to touch-up the paint to  
protect from future corrosion. The paint kit includes the necessary paint to properly maintain  
or touch-up a generator enclosure.  
005704-0  
Completely wireless and battery powered, Generac's wireless remote monitor provides you  
with instant status information without ever leaving the house.  
005928-0  
005951-0  
Basic Wireless Remote  
Advanced Wireless  
Remote  
Remotely control generator functions with the advanced model's LCD display. In addition to  
remote testing of the generator, set the exercise cycle and maintenance interval reminders.  
The PMM Starter Kit consists of a 24 VAC, field installed transformer that enables the use  
of the 24 VAC Power Management Modules (PMMs) and one PMM. The standard controller  
(without starter kit) can control two HVAC loads with no additional hardware. Not compatible  
with pre-wired switches.  
006199-0  
006186-0  
PMM Starter Kit  
Power Management Modules are used in conjunction with the Smart Switch to increase its  
power management capabilities. It gives the Smart Switch additional power management  
flexibility not found in any other transfer switch. Not compatible with pre-wired switches.  
Note: PMM Starter Kit required.  
Power Management  
Module (50 Amps)  
Generac's Mobile Link allows you to check the status of your generator from  
anywhere that you have access to an Internet connection from a PC or with any  
smart device. You will even be notified when a change in the generator’s status  
occurs via e-mail or text message. Note: Harness Adapter Kit required.  
006463-0  
006478-0  
Mobile Link™  
The Harness Adapter Kit is required to make liquid-cooled units compatible with  
Mobile Link™.  
Harness Adapter Kit  
®
Generac Power Systems, Inc. • S45 W29290 HWY. 59, Waukesha, WI 53189 • generac.com  
©2013 Generac Power Systems, Inc. All rights reserved. All specifications are subject to change without notice. Bulletin 0K4729-A Printed in U.S.A. 07/19/13  
 

Eiki Projection Television EIP 3000N User Manual
Friedrich Air Conditioner CP18F30 User Manual
Fujitsu Flat Panel Television PDS4207W H User Manual
GBC Laminator 930 400 User Manual
GE Barcode Reader 994 0089 User Manual
GE Fryer DBVH520EJ User Manual
GE Monogram Ventilation Hood ZV925SL User Manual
GE Power Supply CS300 User Manual
GE Toaster 168955 User Manual
Global Machinery Company Drill DP21 User Manual