Global Machinery Company Drill MX372 User Manual

Never use a tool for a purpose for which it was not intended.  
Environmental protection  
Additional safety instructions for multi rotary tools  
7. Dress correctly. Do not wear loose clothing or jewellery. They can be  
caught in moving parts. Rubber gloves and non-slip footwear are  
recommended when working outdoors. If you have long hair,  
wear a protective hair covering.  
8. Use safety accessories. Safety glasses and earmuffs should  
always be worn. A face or dust mask is also required if the  
drilling operation creates dust.  
9. Do not abuse the power cord. Never pull the cord to  
disconnect the tool from the power point. Keep the cord away  
from heat, oil and sharp edges.  
10. Secure the work piece. Use clamps or a vice to hold the work  
piece. It is safer than using your hand and frees both hands  
to operate the tool.  
Do not use accessories (such as grinding discs) with a maximum  
rated speed below 35,000 RPM  
Recycle unwanted materials instead of disposing of them  
as waste. All batteries, tools, hoses and packaging must  
be sorted, taken to the local recycling centre and recycled  
or disposed of in an environmentally safe way.  
Always wear eye, ear and breathing protection  
Do not apply too much pressure when grinding, cutting, etc  
Keep your hands well clear of the cutting devises  
Full 2 year home use warranty  
Whilst every effort is made to ensure your complete satisfaction with  
this tool, occasionally, due to the mass manufacturing techniques, a  
tool may not live up to our required level of performance and you may  
need the assistance of our service department.  
Description of symbols  
The rating plate on your tool may show symbols. These represent  
important information about the product or instructions on its use.  
WARNING. The use of an accessory or attachment, other than  
those recommended in this Instruction Manual, may present a risk  
of personal injury.  
This product is warranted for a 2–year period for home domestic use  
from the date of the original purchase.  
If found to be defective in materials or workmanship, the tool or the  
offending faulty component will be replaced free of charge with another  
of the same item. A small freight charge may apply.  
The warranty replacement unit is made available only by returning the  
tool to the place of purchase with a confirmed register receipt. Proof of  
purchase is essential. We reserve the right to reject any claim where the  
purchase cannot be verified.  
This warranty does not include damage or defects to the tool caused by or  
resulting from abuse, accidents, alterations or commercial or business uses.  
It also does not cover any bonus accessories unless the tool is a GMC  
Platinum Professional model.  
Please ensure that you store your receipt in a safe place.  
Conditions apply to the above warranty.  
If you need direction of what constitutes a free of charge warranty  
claim, please review the guide on the rear of the Receipt Holder. An  
indication is given as to the types of claim that are permissible, and  
those that are not.  
Wear hearing protection.  
Wear eye protection.  
Wear breathing protection.  
To use this tool properly, you must observe the safety regulations,  
the assembly instructions and the operating instructions to be  
found in this Manual. All persons who use and service the machine  
have to be acquainted with this Manual and must be informed  
about its potential hazards. Children and infirm people must not  
use this tool. Children should be supervised at all times if they  
are in the area in which the tool is being used. It is also  
imperative that you observe the accident prevention regulations in  
force in your area. The same applies for general rules of occupa-  
tional health and safety.  
Double insulated for additional protection.  
11. Do not overreach. Keep your footing secure and balanced at  
all times.  
Conforms to relevant standards for  
electromagnetic compatibility.  
12. Look after your tools. Keep tools sharp and clean for better  
and safer performance. Follow the instructions regarding  
lubrication and accessory changes. Inspect tool cords periodically  
and, if damaged, have them repaired by an authorised service  
facility. Inspect extension cords periodically and replace them  
if damaged. Keep tool handles dry, clean and free from oil  
and grease.  
13. Disconnect idle tools. Switch off the power and disconnect  
the plug from the power point before servicing, when changing  
accessories and when the tool is not in use.  
14. Remove adjusting keys and wrenches. Check to see that  
keys and adjusting wrenches are removed from the tool before  
switching on.  
15. Avoid unintentional starting. Always check that the switch  
is in the OFF position before plugging in the tool to the power  
supply. Do not carry a plugged in tool with your finger on the  
switch.  
Specifications  
Input power:  
140W  
The manufacturer shall not be liable for any changes made to the  
tool nor for any damage resulting from such changes.  
Power supply:  
230-240Vac ~ 50 Hz  
10000-35000 RPM  
Ø 3.2mm  
Even when the tool is used as prescribed it is not possible to  
eliminate all residual risk factors. The following hazards may arise  
in connection with the tool’s construction and design:  
No load speed:  
Collet capacity: Max Drill size:  
Max Cutting disc size:  
Ø 24mm  
Damage to the lungs if an effective dust mask is not worn.  
Damage to hearing if effective earmuffs are not worn.  
Damage to eyes if effective goggles are not worn  
Weight:  
1.2 Kg  
General safety instructions  
Risk of injury unless hands are kept well clear of cutting devises  
To use this tool properly, you must observe the safety regulations, the  
assembly instructions and the operating instructions to be found in  
this Manual. All persons who use and service the machine have to be  
acquainted with this Manual and must be informed about its potential  
hazards. Children and infirm people must not use this tool. Children  
should be supervised at all times if they are in the area in which the  
tool is being used. It is also imperative that you observe the accident  
prevention regulations in force in your area. The same applies for  
general rules of occupational health and safety.  
Unpacking  
Due to modern mass production techniques, it is unlikely that  
your GMC Power Tool is faulty or that a part is missing. If you find  
anything wrong, do not operate the tool until the parts have been  
replaced or the fault has been rectified. Failure to do so could  
result in serious personal injury.  
16. Use outdoor rated extension cords. When a tool is used  
outdoors, use only extension cords that are intended for  
outdoor use and are so marked.  
17. Stay alert. Watch what you are doing. Use common sense. Do  
not operate a power tool when you are tired.  
Dear Customer  
If you require any help with your product, whether it is a Warranty  
claim, spare part or user information:  
Know your product  
18. Check for damaged parts. Before using a tool, check that there  
are no damaged parts. If a part is slightly damaged, carefully  
determine if it will operate properly and perform its intended  
function. Check for alignment of moving parts, binding of moving  
parts, breakage of parts, proper mounting and any other conditions  
that may affect the operation of the tool. A part that is damaged  
should be properly repaired or replaced by an authorised service  
facility, unless otherwise indicated in this Instruction Manual.  
Defective switches must be replaced by an authorised service  
facility. Do not use a tool if the switch does not turn the tool on  
and off correctly.  
Warning. When using power tools, basic safety precautions should  
always be taken to reduce the risk of fire, electric shock and personal  
injury. Also, please read and heed the advice given in the additional  
important safety instructions.  
1. Keep the work area clean and tidy. Cluttered work areas and  
benches invite accidents and injury.  
2. Consider the environment in which you are working. Do not use  
power tools in damp or wet locations. Keep the work area well lit.  
Do not expose power tools to rain. Do not use power tools in the  
presence of flammable liquids or gases.  
This mini-drill is ideal for drilling, sanding, milling, grinding, polishing,  
sharpening, engraving, cutting and paring. It can be used on most  
metals, glass, wood and ceramics. Use the machine and accessories only  
for intended applications. All other applications are expressly ruled out.  
Please phone our Help Line 1300 880 001, for an immediate response.  
Introduction  
The MX372 Mini Drill is supplied as part of a kit that includes  
accessories and a storage case.  
Your new GMC power tool will more than satisfy your expectations. It  
has been manufactured under stringent GMC Quality Standards to meet  
superior performance criteria.  
1. Cord protector  
3. On/off switch  
5. Spindle lock button  
7. Collet  
2. Wire loop  
4. Variable speed dial  
6. Collet nut  
You will find your new tool easy and safe to operate, and, with proper  
care, it will give you many years of dependable service.  
8. Brush caps  
3. Keep visitors away from the work area. All visitors and onlookers,  
especially children and infirm persons, should be kept well away from  
where you are working. Do not let others in the vicinity make contact  
with the tool or extension cord.  
4. Store tools safely. When not in use, tools should be locked up out  
of reach.  
5. Do not force the tool. The tool will do the job better and safer  
working at the rate for which it was designed.  
6. Use the correct tool for the job. Do not force small tools or  
19. Guard against electric shock. Prevent body contact with  
grounded objects such as water pipes, radiators, cookers and  
refrigerator enclosures.  
20. Use only approved parts. When servicing, use only identical  
replacement parts. Use an authorised service facility to fit  
replacement parts.  
Warning. The use of an accessory or attachment, other than those  
recommended in this Instruction Manual, may present a risk of  
personal injury.  
Caution. Carefully read through this entire Instruction Manual before  
using your new GMC Power Tool. Take special care to heed the Cautions  
and Warnings.  
Your GMC power tool has many features that will make your job faster  
and easier. Safety performance and dependability have been given top  
priority to the development of this tool, making it easy to maintain and  
operate.  
9. Collet cover  
8
4
2
5
6
attachments to do the job best handled by a heavier duty tool.  
7
9
1
8
3
 
3
4
5

Edimax Technology Network Card HP 8501 User Manual
Everpure Refrigerator CGCL1 User Manual
Fagor America Cookware Double Boiler User Manual
Fender Speaker Rumble 210 User Manual
First Operations Air Conditioner 300 1200 CFM User Manual
Frigidaire Range 316135921 User Manual
Fundex Games Games Wildfire User Manual
Geemarc Cordless Telephone CL10 User Manual
Generac Portable Generator 6461 User Manual
Gianni Industries Door EX 827 User Manual