Global Machinery Company Engraver DEC007EN User Manual

3
1
2
13W  
ELECTRIC  
ENGRAVER  
DEC007EN  
4
1. On/off switch  
2. Engraving tip  
3. Stroke adjustment dial  
4. Tip release screw  
5. Power cord  
5
Full 2 years home use warranty  
Environmental protection  
Electrical safety  
Whilst every effort is made to ensure your complete  
satisfaction with this tool, occasionally, due to the mass  
manufacturing techniques, a tool may not live up to our  
required level of performance and you may need the  
assistance of our service department.  
Recycle unwanted materials instead of  
If cordset is damaged, have it replaced by an  
authorised service centre.  
disposing of them as waste. All tools, hoses  
and packaging should be sorted, taken to  
the local recycling centre and disposed of in  
an environmentally safe way.  
Power tool plugs must match the outlet.  
Never modify the plug in any way. Do not use any  
adapter plugs with earthed (grounded) power tools.  
Unmodified plugs and matching outlets will reduce  
risk of electric shock.  
This product is warranted for a 2-year period for home  
domestic use from the date of the original purchase. If  
found to be defective in materials or workmanship, the  
tool or the offending faulty component will be replaced  
free of charge with another of the same item. A small  
freight charge may apply.  
The warranty replacement unit is only made available  
by returning the tool to the place of purchase with  
a confirmed register receipt. Proof of purchase is  
essential. We reserve the right to reject any claim where  
the purchase cannot be verified.  
This warranty does not include damage or defects to  
the tool caused by or resulting from abuse, accidents,  
alterations or commercial or business use.  
It also does not cover any bonus accessories unless the  
tool is a GMC Platinum Professional model.  
Please ensure that you store your receipt in a  
safe place.  
Conditions apply to the above warranty.  
If you need direction of what constitutes a free of  
charge warranty claim, please review the guide given  
on the rear of the Receipt Holder. An indication is given  
as to the types of claim that are permissible, and those  
that are not.  
Description of symbols  
The rating plate on your tool may show symbols. These  
represent important information about the product or  
instructions on its use.  
Avoid body contact with earthed or grounded  
surfaces such as pipes, radiators, ranges and  
refrigerators. There is an increased risk of electric  
shock if your body is earthed or grounded.  
Wear hearing protection.  
Wear eye protection.  
Wear breathing protection.  
Do not expose power tools to rain or wet  
conditions. Water entering a power tool will increase  
the risk of electric shock.  
Do not abuse the cord. Never use the cord for  
carrying, pulling or unplugging the power tool.  
Keep cord away from heat, oil, sharp edges or  
moving parts. Damaged or entangled cords increase  
the risk of electric shock.  
Double insulated for additional protection.  
Conforms to relevant standards for  
electromagnetic compatibility.  
CAUTION  
Thoroughly read and understand all  
instructions before using this product.  
When operating a power tool outdoors, use an  
outdoor extension cord suitable for outdoor use.  
Use of a cord suitable for outdoor use reduces the  
risk of electric shock.  
S2: 10 min.; Indicates operating time at no more than  
10 minutes at rated load followed by a complete cool  
down of the tool.  
Personal safety  
Stay alert, watch what you are doing and use  
common sense when operating a power tool. Do  
not use a power tool while you are tired or under the  
influence of drugs, alcohol, or medication. A moment  
of inattention while operating power tools may result  
in serious personal injury.  
Specifications  
Input power:  
Power supply:  
Engraving bit:  
Cord length:  
Tool Weight:  
13W  
230-240V ~ 50 Hz  
Tungsten Carbide Tipped steel  
1.4 metres  
Dear customer  
If you require any help with your product, whether it is a  
Warranty claim, spare part or user information, please  
phone our Help Line for an immediate response.  
Phone 1300 880 001 in Australia  
or 0800 445 721 in New Zealand.  
Use safety equipment. Always wear eye  
protection. Safety equipment such as a dust  
mask, non-skid safety shoes, hard hat, or hearing  
protection use.  
Avoid accidental starting. Ensure the switch is in  
the off-position before plugging in. Carrying power  
tools with your finger on the switch or plugging in  
power tools that have the switch on invites accidents.  
Remove any adjusting key or wrench before  
turning the tool on. A wrench or a key that is left  
attached to a rotating part of the power tool may  
result in personal injury.  
0.4 kg  
Safety instructions  
WARNING. Read and understand all instructions.  
Failure to follow all instructions listed below may result  
in electric shock, fire and/or serious injury. The term  
“power tool” in all of the warnings below refers to your  
mains-operated (corded) power tool or battery-operated  
(cordless) power tool.  
Introduction  
Your new GMC power tool will more than satisfy  
your expectations. It has been manufactured under  
stringent GMC Quality Standards to meet superior  
performance criteria.  
Save these instructions  
Work area  
You will find your new tool easy and safe to operate,  
and, with proper care, it will give you many years of  
dependable service.  
Do not overreach. Keep proper footing and balance  
at all times. This enables better control of the power  
tool in unexpected situations.  
Keep work area clean and well lit. Cluttered and  
dark areas invite accidents.  
Do not operate power tools in explosive  
atmospheres, such as in the presence of  
flammable liquids, gases, or dust. Power tools  
create sparks which may ignite the dust or fumes.  
Caution  
Dress properly. Do not wear loose clothing or  
jewellery. Keep your hair, clothing and gloves away  
from moving parts. Loose clothes, jewellery or long  
hair can be caught in moving parts.  
Carefully read through this entire Instruction Manual  
before using your new GMC Power Tool. Take special  
care to heed the Cautions and Warnings.  
Keep children and bystanders away while  
operating a power tool. Distractions can cause you  
to lose control.  
Your GMC power tool has many features that will make your  
job faster and easier. Safety, performance, and dependability  
have been given top priority in the development of this tool,  
making it easy to maintain and operate.  
If devices are provided for the connection of dust  
extraction and collection facilities ensure that  
these are connected and properly used. Use of  
these devices can reduce dust-related hazards.  
Code: DEC007EN  
Date: 060113  
Black  
Edition: 12  
Op: DCR  
 

Eizo Computer Monitor Digital Mammography Monitor User Manual
ETI Sound Systems INC Stereo Amplifier LG 200AS User Manual
Fluke Ventilation Hood 68X Series User Manual
Ford Automobile Accessories HM02 E 10712484 User Manual
Fostex Musical Instrument VM08 User Manual
Fujitsu Air Conditioner Remote Controller User Manual
Fujitsu Server M10 4 User Manual
Fusion Car Speaker MS BX3020 User Manual
Gateway Server E 842R User Manual
Generac Portable Generator 09779 2 User Manual